How to Disassemble your
Dygma Raise

We believe everybody should have the right to repair, mod, and customize their keyboard how they wish.
All you'll need is a philips screwdriver and the keycap/switch puller included in your enhancement kit.

Raise Sticky Palm Pads

Step 1:
Remove Palm Pads

The great thing about our Palm Pads is that you can revive them at any point by washing them in cold water. So no need to worry about it losing its stickiness!

Raise Keycap Removal

Step 2:
Remove Keycaps

This is the Puller's time to shine. Use the loop side to grip the keycaps from below, then gently pull them all out.

Removing Dygma Raise Hot-swappable Switches

Step 3:
Remove switches

Use the other side of the puller to start working on the switches. Press the 2 clips on the top and bottom side of the switches with the hooks, then pull.

Removing Raise Stabilizers

Step 4:
Remove Stabilizers

The stabilizers can be removed by pushing the clips on each side, then pulling the stabilizer out.

Removing Dygma Raise Back Plate

Step 5:
Unscrew the Back Plate

There's 7 screws on each side of the keyboard for this step. Remove all the screws and place them somewhere safe!

Unplugging Dygma Raise PCB Cable

Step 6:
Open the keyboard

It's time to open up the Raise. Lift the back plate from the top plate carefully, then use a screwdriver to gently push the tabs holding the PCB cable in place - then pull the cable out.

Unscrewing Dygma Raise Main PCB

Step 7:
Unscrew the PCBs

Each PCB has 4 screws. Remove them and lift the PCBs from the top plate. Make sure to place these somewhere soft and safe!

Unscrewing Dygma Raise Low-Profile PCB

Step 8:
Unscrew low-profile PCBs

Lastly, you'll find a smaller, low-profile PCB attached to the each side of the base. Unscrew the 2 screws to remove it.

Admire your disassembled keyboard in all its glory!

Remember that opening your Dygma Raise won’t void your warranty.

If you want to learn more about the Dygma Raise components, watch this video 👇

Dygma Raise Reassembly

Step 9:
Reassemble and enjoy this engineering masterpiece

Reverse all the steps above to put your Raise back together in no time!

Need help disassembling your Raise?

Head over to our help center or contact us if you don’t find a solution to your problem

  • Switches

    Regular price
    From $45.00
    Regular price
    Sale price
    From $45.00
    $45.00
    Switches
  • Enhancement Kit

    Regular price
    $29.00
    Regular price
    Sale price
    $29.00
    $29.00
    Enhancement Kit
  • Raise Tenting Kit

    Regular price
    $89.00
    Regular price
    Sale price
    $89.00
    $89.00
    Raise Tenting Kit
    Sold out
  • Neuron (Wired)

    Regular price
    $59.00
    Regular price
    Sale price
    $59.00
    $59.00
    Neuron (Wired)
    Sold out
  • Keycaps

    Regular price
    From $49.00
    Regular price
    Sale price
    From $49.00
    $49.00
    Keycaps
  • Palm Pads

    Regular price
    $35.00
    Regular price
    Sale price
    $35.00
    $35.00
    Palm Pads
  • Travel Case

    Regular price
    $59.00
    Regular price
    Sale price
    $59.00
    $59.00
    Travel Case